CSCI at CU: C++ Style Guide
Version 4.2 - July 24, 2008

In order to allow easy reading and understanding of everybody's programs, and to avoid risky programming practices, all software organizations have guidelines that programmers must follow. This page contains the guidelines we require you to follow this semester. For your interest, you might also look at a real-world programming stylesheets.

At the same time, this page defines abbreviations that instructors can use in providing feedback on your programs. For example, if we mark II on a program you turn in, this sheet tells you that we think you have used incorrect indenting.

So, here's a list of bad things we'll be looking for in your programs, and the abbreviations we'll use to notify you if we find them.

FCI File comment incomplete.

Each .cxx or .h file must have a comment at the top indicating the file name, the name and email of the programmer (that's you), the date it was written, and a concise but complete description of the purpose.

LTL Line too long.

Please keep all lines under 80 characters so that when the program is printed, the resutl is still readable.

II Incorrect indenting.

There are many ways people indent their C++ code, but the one way that we'll accept is described here. This way has some advantages in readability, but more than that (1) if you are all consistent it helps us read your code, and (2) in real life you'll have to get used to following specific guidelines in your code, so why not get some practice now.

The rules are:

  • (a) opening curly braces are always placed on a line by themselves immediately below the first character of the keyword that controls the code in the brace, such as for, if, while or else, or the header of a function. This line may also contain a comment starting with //.

  • (b) if you prefer, the entire body of a function may be indented an extra four spaces beyond the line that contains the function name and parameters.

  • (c) lines inside braces are indented four spaces to the right of the brace

  • (d) closing curly braces always occur on lines by themselves immediately below the corresponding opening brace

  • (e) With an if, else, for, while or similar construct that controls a single statement, without curly braces, indent the statement four spaces (or, if the statement is short, you may put it on the same line as the if, else, for, while, etc. (just make sure that the whole line does not exceed 80 characters).

For example...

void foo(int x, int y) 
    int i; 
    for (i = 0; i < N; i++) 
        cout << i << endl; 
        cout << i*i << endl; 
        if (i > M)
            cout << "M exceeded" << endl;

WSS White space and slashes.

Programs are more readable if the code has meaningful white space separating parts. In particular:
  • Put two blank lines and one long line of slashes before every function defintion
  • Put one long line of slasshes after every function definition
  • Put one blank line after the local variable declarations at the top of a function
  • Put one blank line before each "//" comment that describes the purpose of a group of lines
One space should occur before and after all binary operations in an expression (except for multiplication, division and % operator). This includes the input (>>), output (<<) and assignment (=) operators. Also one space after keywords for, while, if, and one space after each semi-colon in the control of a for-loop.

AO Alphabetization and Organization

Within a class definition, functions must be organized into four groups in this order:
  1. Constructors, Destructors and Assignment Operator
  2. Constant Member Functions
  3. Modification Member Functions
  4. Nonmember Friend Functions
In the first group, the constructors must be first, then the destructors, then the assignment operators. All other groups should be listed alphabetically. The documentation of the member functions must all be together in the header file in the same order as in the definition. The implementations of the member functions must all be together in the implementation file in the same order as in the definition.

Prototypes, documentation and implementations of nonmember functions must be all together and in alphabetical order. Exception: The main function may be at the end.

BN Bad name.

Choose names for functions and variables that convey what they are used for. Variables that are just used for indexing or counting in a loop should have short names such as i or n or t.

CN Capitalization and naming style:

You may use one of two naming conventions, so long as you are consistent. Most programmers will probably prefer the underscore style, but much Win32 programming uses the Hungarian notation developed by Charles Simonyi.

Underscore Style:

Variable names, function names and new class names are all lower-case letters. Names of constants are all upper-case letters. If a name consists of several words, then these words are separated by an underscore (such as plant_age or MANY_COLUMNS). Functions that do not return a value (void function) should have a verb as the first part of the name (such as print_table). Functions that return a bool value should have the word "is" or "are" as the first part of the name (such as is_inside or are_close). Other functions that return a value should have a noun or noun phrase as the name (such as feet_per_second).

Hungarian Notation:

Variable names, function names and new class names all have their first letter of each word capitalized. Constants are all capitals with no underscores. Any variable can have a prefix to indicate its type or purpose. Prefixes that I have seen:
bBooleanbool bInside;
byBYTE (an 8-bit value)BYTE byOffset;
cCharacterchar cLetterGrade;
cbCount in BytesUINT cbBuffer;
dDouble Floating-Point Numberdouble dAltitude;
dwDWORD (a 32-bit value in WIN32 programming)DWORD dFlags;
fFloating-Point Numberfloat fHeight;
fnFunctionvoid repeat(void fnWhatToRepeat( )...
hHandleHANDLE hBrush;
hdcHandle to a Device ContextHDC hdcDrawingArea;
hwndHandle to a WindowHWND hwndScoreDisplay;
iInteger (32-bits in WIN32 programming)int iPixelsPerInch;
ifInput File Streamifstream ifCorpus;
isInput Streamistream isKeyboard;
msgA Windows MessageMSG msg;
nAn Integer That Counts the Number of Instances of Some Dataint nStudents;
ofOutput File Streamofstream ofResults;
osOutput Streamostream ofScreen;
siShort Integershort siCents;
strC++ String Objectstring strSurname;
szA Null-Terminated C Stringchar szSurname[MAXLENGTH];
wWORD (which is still 16-bits in WIN32 programming)WORD wFlags;
x,yShort used as Cartesian coordinatesshort xLocation, yLocation;
struct or class name (or abbreviation)point pointWhere;
statistician statGrades;

Certain modifiers can appear before the Hungarian prefixes. Sometimes you'll see m_ as a prefix for a member variable, for example, though Iy dislike that one. Some others:
ar or rgArray (rg means "range")double rgdScores[MANYSCORES];
lLonglong double dAltitude;
p or lpPointer (always long 32-bits in WIN32) to a single itemchar* lpszWindowName;
sStaticstatic int siCurrentValue;
uUnsignedunsigned int uiPopulation;

GV Global variable.

Global variables are forbidden. Global constants are allowed.

DC Define constant.

If the same value occurs in more than one place in the code, define a constant for that value. If a number comes from some physical value with an easily described name, define a constant for that number. Also, if 5,6, and 7 (say) occur in the program, with 5 arising from 6-1 and 7 from 6+1, define a constant for 6 (say C) and express the others as C-1 and C+1. This is crucial in making easily changed programs.

NC Needs comment.

Each function needs a comment explaining the use of the function. The comment must contain enough information that any programmer could use the function. One form for these comments is to provide a precondition and a postcondition. Make sure that the purpose of each parameter is clearly explained. This comment should appear both with the function's definition and in any header files that provide the function.

If there's something difficult about the code in a function definition, explain it in a comment near the difficult code. Long stretches of code should be broken into smaller pieces (around 6-10 lines per piece) with a short comment at the top of each section to explain its purpose. A programmer should be able to read these comments to get a general idea of a program's flow.

The implementation file for any class requires a comment at the top to tell a programmer exactly how all the member variables are used.

UC Unnecessary comment.

With carefully choosen names, you'll need few comments, and a programmer can read these few comments to get a general idea of the program flow (or to understand difficult parts). Comments that explain the obvious are bad; leave them out.

CTC Code too complex.

Find a simpler approach.

FTL Function too long.

A function should have no more than four dozen lines after the declarations. We'll allow an exception if the function is little more than one large switch statement, and none of the cases get too long.

FP Function format problem.

Use value parameters or const reference parameters to get info into functions. Use return to produce values, if you can, and use non-const reference parameters only when you have to (when the function produces several pieces of information). Avoid functions that return information in two different ways (through the return statement and also through its parameters).

BUI Bad user interface.

Is output clearly labelled, so the user can tell what the program has done? If user input is requested, is there a reasonable prompt? Is the user asked to provide information that the program should be able to figure out for itself?

DNW Does not work.

This part of the code won't do what it needs to.


Will not compile.


Program must compile under the -Wall option with no compiler warnings.

PDR Poor data representation.

An example would be using separate variables to hold information that could be more easily handled in an array.

MD Misplaced declaration or definition.

All variable declarations must be together at the top of a function's definition. This makes it easier for a programmer to find the declarations. For a complete program, function prototypes should precede main() and function definitions should follow main().

NMR Needs to be more robust.

If the user makes an error this part of the program could blow up or behave unpredictably.

NGE Not general enough.

This marks a place where the program is unnecessarily limited in what it can handle. For example, if a program can handle only input names with up to ten letters, then the program is unneccessarily restrictive. Surprisingly, more general programs are often shorter and simpler, not longer and more complex, than ones which handle special cases.

CF Combine functions.

The code uses two or more different functions to do very similar jobs. This mark says that one single function with parameters would be a better approach.

PORT Portability.

Avoid using non-portable code (such as the conio.h header file). The only exception that we'll allow is the use of winbgim.h for graphics.